EP-510H CRIMPING CAPACITY 50-400MM2 AL,CU TERMINAL SPLIT HYDRAULIC
PLIERS PRODUCT USE AND CHARACTERIST
1)The compression pliers are designed for hydraulic crimping on
power cable and wire. The crimped conductor is tested in high
conductivity and close contact so that it's uneasy to break out and
turn hot .
2)Open cut design for convenient operation.
3)The head could be rotated 180° freely for narrow space working.
4) Standard die assembling 50, 70, 95, 120, 150,185,240,300,400mm2
5) The oil pipe coupler fitted with PT 3/8'' thread
6) To be worked with pedal pump, manual pump and electric driven
1.CRIMPER HEAD WITH C-SHAPE OPEN TYPE
The maximum stroke is 38mm, which is convenient to put and take
when you press the copper and aluminum terminal.
2.THICKENING MOLD DESIGN
The size is thicker than others, so it is tight and not easy to
3.IT CAN BE USED WITH HYDRAULIC PUMPS
Split hydraulic crimper should work with manual hydraulic pump or
electric hydraulic pump.
4.MALE CONNECTOR+ PLASTIC DIRT-PROOF BOOT
The female connector on the hydraulic pump is connected with the
male connector on the crimper (thread specification: ZG3/8). When
not in use, the plastic boot can be screwed onto the male connector
to prevent dust.
5.PORTABLE PLASTIC BOX PACKAGING
The internal molds are arranged neatly.